And now for something completely different….
From my farm boy entrepreneur father, I inherited the can-do attitude of simply thinking an awful lot of problems can be solved if you just go at it. In general, this has served me well. For example, I am generally willing to pay people to work on our cars or plumbing – I can do, sure, but lacking the expertise (and all those nice tools!) it’s better to have the pros do it. *How* I came to realize this involves, not some abstract considerations, but rather, flooding a bathroom and lying on my back outside on the asphalt in the dead of winter under a VW bug pulling on an accelerator cable. Among other equally, um, memorable, experiences. So, unless it’s pretty straight-forward, I’ll call the plumber or electrician (don’t ask) and take my cars in for service.
Plus I’m cheap. I don’t like throwing broken things out, and do like jury-rigging solutions out of stuff lying around. This leads to thing like the compost box that took several *days* to build out of an old oak futon frame, leftover wainscoting boards, and wire mesh scraps, among other things. On the plus side, works OK and it’s still there 3 years later; on the down side, I’m never getting that time back and could have made something at least as functional out of a couple sheets of plywood and some 2 x 4s in about 2 hours – which I will need to do in the near future anyway, as the needlessly complicated present one is falling predictably apart. .
So, got up early today, and was watering plants on the patio. The hose for the patio is one of those spiral stretchy ones that’s quite a few years old. A while back, it sprung a leak near the middle.
Do I say: old cheap hose, we’ve got our money’s worth, toss it, as the first leak is generally a sign of more leaks to come? Or: I’ll see if they have the appropriate hose patch kit at Ace?
OR: do I grab some electrical tape and have at it?
So the tape held for a short while, then started leaking, then spraying. Next, I tried slathering on some Shoe Goo and covering with duct tape. That was – not good. So, this morning, I decide to give it one more go. Because I’m kinda stupid that way.
I’m thinking the Shoe Goo wasn’t a bad idea, I just needed more and a longer cure time. And that the rapid failure of the duct tape effort might have something to do with goopy, lumpy terrain due to the previous attempts…
So, I cut out the bad section entirely, find a plastic sleeve thing that fits over the hose, slather on the Shoe Goo in a manner intended to cause the sleeve to spread it out when I shove it over the ends. And I stick it together…
Then I start worrying that there’s not enough strength along the length of the hose, that this patch will pull out when I drag the hose around. Soooo – looking around for something handy, I spy some nylon cord. Hmmm. Cut a few lengths longer than the patch job, and Shoe Goo them on. That doesn’t look right…
So I wrap the length of the repair in the cord, and Shoe Goo *that* on. Then decide that, after it dries, I’ll wrap the whole thing in electical tsape, extending a good 6″ on either side of the repair…
Did I mention that, while fiddling around with all this, I pulled the hose out of the sleeve at least 3 times, and, ramming back in means I’m also putting Shoe Goo on the *inside* of the hose, where it will not help and may very well clog the hose.
So, instead of throwing an old hose away, instead of looking for a repair kit next time I’m at Ace, I
wasted spent a half hour doing this:
And then I’m going to waste a hundred feet of electrical tape to cover this monstrosity up. Any bets on how fast it springs a leak somewhere else, in the unlikely event this doesn’t just fail out of the chute or that I ended up clogging it up with Shoe Goo, or both?